hydraulic clutch
英 [haɪˈdrɒlɪk klʌtʃ]
美 [haɪˈdrɔːlɪk klʌtʃ]
液压式离合器；液力偶合器
双语例句
- Study on smooth start device with hydraulic slip clutch in a mill
磨矿机液压滑差离合器软起动装置研究 - Brake fluid is another oil product used for a hydraulic brake or a clutch cylinder of a car.
制动液是装备液压制动和离合器工作缸的汽车使用的另一种油料。 - Steering clutch is hydraulic pressed, non-constant engaged clutch.
转向离合器为全液压压紧的非常结合离合器。 - Study of the Metal V-Belt Type Soft-Start Equipment with the Hydraulic Viscosity Clutch
液粘离合金属带式软起动装置的研究 - Mechanism Simulation and Control System Research of Pneumatic Impression on Offset Prnting; clutch operation ( hydraulic) flywheel mechanical clutch press
胶印机气动离合压机构仿真及其控制系统研究 - A hydraulic clutch and self-adjusting mechanism eliminates the need for adjustments throughout the lifespan of the transmission.
阿液压离合器和自动调节的机制消除了调整，在整个传输寿命的需要。 - In this paper, the causes of faults in the hydraulic capstan and troubleshooting methods were described, and the made method for the double-slide clutch was proposed.
通过对某船液压绞缆机故障的分析和排除，阐述了该绞缆机故障产生的原因、排除方法以及油马达十字形滑块联轴器的制造方法。 - Determination of Hydraulic System Parameters of Oil-Film Clutch in Soft-Start of Belt Conveyor
带式输送机软起动中油膜离合器液压系统参数确定 - The paper deals with the type and performance of the hydraulic couplong and bladder clutch used in the mill drive system, and their commercial applications are also introduced.
侧重介绍了目前已在磨机传动系统中使用的液力离合器和气动离合器的结构、性能及其工业应用情况。 - In vehicle automatic transmissions, the smooth control of hydraulic performance of clutch has more direct effect on the shift quality.
在车辆的自动换档过程中，离合器充油油压特性的缓冲控制，直接影响着换档过程中品质的好坏。 - This paper presents a design of a new kind of hydraulic automobile clutch, namely the actuator of rotary hydraulic cylinder which is being changed from the manual driving actuator of friction clutch.
本文在分析上述两类离合器的优缺点基础之上，设计了一种新型的液压自动离合器，即将摩擦式离合器的手动执行机构改为由液压缸旋转式配油的执行机构； - Security is the critical problem of automobile and tractor. It has strong advantage in economy using hydraulic technology to solve the match problem between brake and clutch system.
安全问题是汽车和拖拉机的关键性问题，利用液压技术解决制动与离合的配合问题在经济性方面有很强的优势。 - 99 10 13 A study on drag torque of hydraulic shift clutch
液压换档离合器带排转矩研究 - Design and research of hydraulic clutch
液压离合器的设计研究 - Trouble Analysis And Improvement of Hydraulic Clutch
某型起动机液压离合器故障分析与改进 - Hydraulic safety coupling is a new friction clutch to protect from over load.
液压安全联轴器是具有过载保护功能的一种新型摩擦联轴器的一种； - Structure principle and maintenance of hydraulic clutch brake
液压离合/制动器的结构原理与维护 - The research results show that pressure steel-belt CVT has a big potential for reducing fuel consumption through some measures such as slip control, improvement on hydraulic return line, separating clutch or start-stop control etc;
根据研究结果指出，通过采取诸如滑移控制、改进的液压回路、分离离合器或启动-停止控制等措施，压力钢带式CVT仍具有较大的降低油耗的潜力； - The accumulation control valve is the key element of the hydraulic clutch system on NK series truck cares.
蓄能控制阀是加藤NK系列汽车起重机起升液压离合器回路自动蓄能系统的核心元件。 - This paper introduces the structure, working principle and determination of the main parameter of hydraulic clutch. Industrial test showes that the clutch has the features of long life, nice seal, safe and reliability and reachs the aim of design.
介绍了液压离合器的结构、工作原理及主参数设计，通过工业性试验证明，其使用寿命长、密封性能好、安全可靠，达到了设计要求。 - Based on the practical situations of current construction equipment maintenance, the fault of master clutch, hydraulic torque converter, driving bridge, steering clutch and brake are discussed.
结合当前工程机械维修工作的实际情况，对主离合器、液力变矩器、驱动桥、转向离合器和转向制动器等部位的故障现象进行了深入的探讨。 - The dynamic math model of shift clutch in engagement process was determined on the basis of hydraulic buffering valve and shift clutch of a power shift steering transmission. The influence of buffering pressure characteristic on shift clutch engagement process was analyzed.
针对某综合传动装置液压缓冲阀和换档离合器，建立了换档离合器结合过程中动态数学模型，分析了缓冲油压特性对换档离合器结合过程的影响。 - The electro hydraulic servo clutch disk spring test bench
电液伺服离合器碟形弹簧试验台 - The theoretical research on transmission hydraulic control system and simulation analysis on the hydraulic control valve and the shift clutch are finished in this paper.
其中，本文主要根据变速器液压系统中的液压调节阀和换挡离合器的结构和工作原理，对它们进行了深入的理论与仿真分析。 - The mathematical model of hydraulic actuator for Auto-clutch was established. A two-loop controller with clutch position fuzzy PID control and duty cycle PID control was designed. Then a simulation model was build in order to test the dynamic response of hydraulic actuator being designed.
建立离合器液压执行机构的数学模型，设计了离合器接合位置模糊PID、占空比PID控制双闭环控制器，并搭建仿真模型检验离合器执行机构对控制目标的跟踪响应情况。 - This topic is based on the hydraulic mechanical stepless transmission test bench. In the binding process of wet clutch the oil pressure characteristics were studied, and the quality of exchange period was studied by means of the orthogonal experiment.
本文以液压机械无级变速器试验台为基础，对变速器湿式离合器结合过程的油压特性进行了试验，并对换段品质进行了正交试验。 - Screw press is one of the molding equipment widely used in manufacture and applied in many kinds of press process in molding of metal and nonmetal materials. Machine types currently in use are friction, hydraulic, clutch and electric screw presses.
螺旋压力机是重要的材料成形设备，广泛应用于金属和非金属材料成型的各种压力加工工艺中。 - In order to achieve the soft-start characteristics of the metal V-belt type soft-start equipment with the hydraulic viscosity clutch, this paper separately designs the two hydraulic control systems and analyzes the function of the main components.
为了实现液粘离合金属带式软起动的特性，本文分别设计了两液压控制回路的原理图，并对其中关键元件做了功能分析。